SuperMicro SuperServer SYS-F628R3-RC1B+ 4U

Description

Product SKUs
SYS-F628R3-RC1B+
SuperServer F628R3-RC1B+ (
Black
)
Motherboard
Super X10DRFR-N
Processor/Cache
CPU
Intel® Xeon® processor E5-2600
v4
†
/ v3 family (up to 145W TDP)
*
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to
22 Cores
†
/ Up to
55MB
†
Cache
System Bus
QPI up to 9.6 GT/s
Note
†
BIOS version 2.0 or above is required
Note
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 2TB
†
ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
2400
†
/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
On-Board Devices
Chipset
Intel® C612 chipset
SAS
SAS 3.0 (12Gbps) via Broadcom 3108
HW RAID 0, 1, 5, 6, 10, 50, 60
SATA
SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® i350-AM2 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
ASPEED AST2400 BMC
Input / Output (per node)
SAS
8 SAS3 (12Gbps) ports
LAN
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 3.0 ports
VGA
1 VGA port
Management
Software
SuperDoctor® 5
Watch Dog
NMI
IPMI 2.0
SUM
and
SSM
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
Chassis
Form Factor
4U Rackmount
Model
CSE-F424AS-R1K28BP
Dimensions and Weight
Width
17.63" (448mm)
Height
6.96" (177mm)
Depth
29" (737mm)
Package
28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
Net Weight: 105 lbs (47.63 kg)
Gross Weight: 150 lbs (68.04 kg)
Available Colors
Black
Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
Hard drive activity LED
2 Network activity LEDs
Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express
1 PCI-E 3.0 x16 (LP) + 1 Micro LP
MicroLP Adapter Matrix
(Networking options)
Drive Bays (per node)
Hot-swap
(6+2) 3.5" Hot-swap SAS3 HDD trays
8 SAS3 or 6x SAS3 + 2 NVMe (optional)
Note: NVMe support requires 2 CPUs installed
Backplane
1 SAS/SATA backplane
1 SAS/SATA/NVMe hybrid (2 slots)
System Cooling (per node)
Fans
2x 8cm 11k RPM middle fans
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
1000W Output @ 100-140V, 8-12A, 50-60Hz
1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
Platinum Certified
[
Test Report
]
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)