RDL TX-MVX 2x1 BNC Manual Rmt Controlled Video Switch

Description

RDL TX-MVX 2x1 BNC Manual Rmt Controlled Video Switch
Brand:
Radio Design Labs
Type:
Video Switch
MPN:
RDL TX-MVX
UPC:
813721016072
Type:
Composite Switcher
1 RDL TX-MVX 2x1 BNC Manual Rmt Controlled Video Switches, w/Rack Mount , NO PS (Power Supply)
The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals.
VIDEO A
is normally connected to
COMMON
. When the TRIG terminal is pulled to ground,
VIDEO B
is connected to
COMMON
and
VIDEO A
is disconnected. The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination. The actual switch (or other module actuating the switch action) may be located remotely from the TX-MVX.
Many RDL modules feature an open-collector
SLAVE
control terminal. These terminals may be used to control the TX-MVX. Alternatively, relay contacts on other equipment may also be used to control the TX-MVX. For example when used with other RDL® modules, the TX-MVX could switch video:
·
Using audio detection (ST-ACR) from an external audio source
·
Using video detection (TX-VCR) from another video source
·
At a prescribed time during a power-up sequence (RU-SQ6A)
·
From logic signals (ST-LCR)
·
Using wall-mounted remote controls (RT2, RC2-ST or RUC-4)
Use the TX-MVX individually in NTSC or PAL systems.
You can combine other RDL products, the mounting bracket can hold up to 5 TX-MVX units and be used as part of a complete audio/video system.
Specifications:
Input(s), Output(s):
BNC, ground-referenced
TRIG Input Current:
2 mA
TRIG Input Threshold:
2Vdc
Ambient Operating Environment:
-10° C to 55° C
Power Requirement:
GROUND-REFERENCED, 24 Vdc at 30 mA
Power Supply Not Included
Recommended Power Supply:
PS-24AS (USA)
PS-24AX (International)
Stock# S3-B2