-40%

Key Digital KD-X444L 4K/18G POH/HDBT/HDMI Extenders

$ 118.8

Availability: 25 in stock
  • Restocking Fee: No
  • Model: KD-X444L
  • Return shipping will be paid by: Buyer
  • Brand: Key Digital
  • Item must be returned within: 30 Days
  • Condition: Manufacturer refurbished 90 Days Warranty
  • MPN: Does Not Apply
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted

    Description

    HDBaseT via Single CAT5e/6 UTP/STP Extension:
    With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
    4K Support:
    4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
    Flexible Power over HDBaseT:
    Only one power connection needed. Tx may power Rx, or Rx may power Tx.
    Low Profile:
    Super slim chassis design
    Signal Extension:
    For resolution and cable quality
    4K/UHD: U p to 230 ft. (70m) using CAT5e/6 Up to 328 ft. (100m) using CAT6A STP / CAT7
    1080p: Up to 328 ft. (100m) maximum
    Long Range Mode:
    Extends 1080p signals up to 500 ft. (152m) using CAT5e/6 (UHD/4K not supported)
    10G Pass-thru:
    Mode enables uncompressed 10.2Gbps signal extension
    HDR10 (High Dynamic Range):
    More life-like images through a greater range of luminance levels
    HDCP 2.2:
    Compliancy up to HDCP 2.2 and backward compliant
    Deep Color Support:
    Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
    EDID Control:
    Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
    Hot Plug Detection Control:
    Enables integrator to choose if active signal voltage is forced to connected input and output devices
    Full Buffer System™:
    Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
    IR Sensor:
    Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
    Up/Down IR:
    Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
    RS-232:
    Bi-Directional control to/from Tx and Rx unit on Phoenix connector
    Lossless compressed digital audio:
    Support for Dolby® TrueHD,Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
    CEC Pass-thru:
    For inter-device control between input and output HDMI channel