10 PCs•✿•ESD Anti-Static Shielding Bags,Metal In, 8"x12" inch,Open-Top,3.1 mils

Description

Metal-In Open-Top Static Shielding Bag is a transparent, metallized static shield bag that provides a static safe environment for sensitive electronic devices. Four layer construction. Polyester dielectric and metal layer provide Faraday effect shielding of ESD and fields. Tribocharging is minimized by the specially processed polyethylene. Coded for QC traceability.
Meets the requirements of EIA 541, EIA 625, MILHDBK-263, MIL-STD-1686, and EOS/ESD Standards.
Provides static safe environment
Four layer construction
Tribocharging is minimized by specially processed polyethylene
Coded for QC traceability
Specifications of the Metal-In Open-Top Static Shielding Bag:
Size: 8" x 12"
Unit of measure: 100/pack
Resistance: 1 x 105 to 1 x 1012 ohms/sq.
Static shielding: <30V
Static decay: 25 lb.
Light transmission: 40%
Thickness: 3.1 mils**
Static Shielding Bags open top is manufactured from industry approved Polyester/Metal/Polyethylene laminates. The polyester dielectric in concert with the metal layer provide Faraday Effect shielding of an Electrostatic Discharge (ESD). The metal layer prevents the penetration of damaging electrostatic fields. Tribocharging is minimized by the specially processed polyethylene.
**Note: Thickness has a tolerance of ±15%
Formula for Bag Size: This technique will help determine the size of static shielding bag needed to package a device, however this information is provided for guidance only and a test fitting is recommended before final size selection. Measure the length, height, and width of the item to be package and apply formula listed below.
Bag length = length + height + 1.5"
Bag width = width + height + 1"